An ideal compatible lower cost solution that is suitable for all fridges with external filters using1/4" inch tube or 1/4" fittings some of which are listed below.
It will replace the original filter on the Modle listed below:-<
Samsung fridges using filter EF9603, EF-9603, WSF100, WSF-100 ALSO modles:- EF-9603 RS21DCMS1 RS21DCNS1 RS21DCSV1 RS21FCNS1 RS21FCSV1 RS21FGRS1 SS20SH1 SS8OLLOX SS20SH2 SS20SP1 SS20WG1 SS20WH1 SS20WH2 SS20WH3 SS20WH5 SS20XA1 SS20XM1 SS20XM2 SS20XS1 S24ADESWQN S24AHESWQN
Atag with external filter
Bosch with external filterSiemens with external filter
LG fridges using filter BL9808Hotpoint fridges using filter BL9808
Daewoo fridges using filter DD7098, DD-7098
GE Smart Water fridges using filter GXRTQ & GXITQ
Our standard filter (top) comes with push fit connectors for quick and easy installation. Simply cut the tube to remove the nut from the old filter to get a new clean bit of tube and then push your the tube firmly into each end connector, no tools or plumbing skills are required or threading with PTFE tape. To remove the tube from the new water filter, hold back the outer ring and pull out the tube. Follow this link to see how it works http://www.johnguest.com/step2a.asp
BUT we also do the AIC2 filter (middle) which has nuts (compression fittings) and the Pentek (bottom) which has the added benefit of scale reduction.
Flow rate up to 0.5 GPM / 2 LPM : Pressure up to 125psi / 6 bar : Temperature up to 100'F / 50'C : Life up to 1500 gals / 6000 litres
Click on the drop down list to find out what this superior filter will remove/reduce.
|
