DOMESTIC REVERSE OSMOSIS SYSTEMS

CONTACT US

Click Here to Return to Previous Page
DOMESTIC RO
6 Stage RO

DOMESTIC

Water Softeners
Fact Sheet

Water Filters
Prices
Cartridges
Fridge Filters
Fact Sheet

RO Systems
Prices
Facts Sheet


Aquatic ROs

Prices

UV
Systems
Prices

LINKS

COMMERCIAL

Softeners
Duplex Softeners
Filtration
Nitrate Removal
Iron Removal
RO for Espresso
Commrcial RO
Industrial RO
UV Systems
pH Correction
De-ioisation

RIO Chillers
Fact Sheets

COMPONENTS

Filter Cartridges
Housings, Brackets,
Clips Etc.
Taps, Valves, Tubes
& Fittings Etc

RO Components


RO50CPP: 4 Stage RO System PRICE: £320 inclusive

50 gpd ro in cabinet

Economical: The simplicity & quality of the RO50 reverse osmosis system provides water at less than 25p per 100 litres

Single Cabinet : Everything's inside the cabinet, only 3 connections.

Big Capacity: Witha a 50 GPD membrane and its 16 litre storage vessel it provides enough water for 6 people

Easy to Fit : Full instructions and all parts means its a easy DIY job to install

Running Cost: Low running costs, uses standard filters & membrane

 
The RO 50CPP: 4 stage 50GPD Cabinet RO System (use with pressures above 35psi)

The RO50CPP comes complete with a CP tap, drain connector, 16 litre storage vessel, all the necessary tubes & fittings plus complete instructions. The RO50CPP is the complete simple, economical answer to your families needs for the purest water available for drinking & cooking.

The purification process starts with a 5 micron pre-filter to remove & reduce large particles. Then the second stage carbon filtration removes chlorine's, pesticides, VOC's, THM's, and smaller particulates. The TFC membrane then separates out the remaining contamination in the water and this is passed to the drain, while the pure water is stored for use in the 16 litre storage vessel. When you require water the water in the 16 litre storage vessel is immediately available for use. It passes through the fourth stage filter just before its dispensed via the tap.

To prevent waste the RO is equipped with a "auto shut-off" valve. Sensing when the 16 litre storage vessel is full it shuts down the system preventing un-necessary water going to waste. The moment you open the tap it will re-activate the system to start producing water again, until the 16 litre storage vessel is once again full, and all of this is all buit into a stylish compact cabinet which fits neatly uner the sink. To aid production the Permeate Pump takes the energy in the drain line and uses it to add pressure to the feed line.

Reverse Osmosis needs decent water pressure (above 35psi) to make it work at an acceptable level of performance. If you pressure is low then choose a system with a pump. Its also a slow process this is why there is a need for a storage vessel with most systems.

Reverse Osmosis Systems waste a certain amount of water. The contaminants, along with waste water are passed to the drain when the unit is running. However this is far greener solution than the cost & waste in producing bottled water, puting it in plastic containers, transporting it and disposing of the waste, not to mention the actually going to the shops to buy it.

 
The RO 50CPP dimensions & spares

Dimensions:-
Main RO Unit 435mm high x 265mm wide x 420mm deep

 

     
Buy New Stage 1C Pre-Filter (change every 6 months) £9.50
Buy New Stage 2C Pre-Carbon Filter (change every 6 months) £12.00
Buy New Stage 3C 50 GPD Membrane (change every 24-36 months) £35.00
Buy New Stage 4C Post-Carbon Filter (change every 12 months) £14.00
RO50CPP: With top cover removed

cabinet 50 gpd ro with permeate pump

 

 

    Domestic Softeners - Domestic Filters - Domestic RO Systems - Domestic UV Systems - Filter Cartridges
Links - Chillers - Housings - Brackets - Clips - Taps - Valves - Tubes - Fittings - RO Components
</body>